FLUKE 9935-S LogWare II Software

User Manual for the Fluke 9935-S LogWare II Software - Page 217

For 9935-S.

PDF File Manual, 275 pages, Read Online | Download pdf file

9935-S photo
Loading ...
Loading ...
Loading ...
Configuration files save the following information about a real-time log
session:
Thermometer readout model, serial number, session temperature scale and
resolution settings
Communications COM port and baud rate settings
Interval between readings and interval between scan sequences
Start log session and End log session settings
Channel configurations including statistical and alarm settings
In addition to allowing configuration files to be saved and opened, LogWa re
optionally allows one configuration file to be opened automatically every time
LogWare runs. This configuration file can be specified in one of two ways: us
-
ing the LogWare Options dialog or using the Log Session Settings dialog.
To specify the default configuration file using the LogWare Options dialog:
1. Select the Options option in the Tools menu.
2. The LogWare Options dialog is displayed.
3. Select the General tab.
4. Check the Show Log Session Settings dialog on start-up check box.
5. Check the Open default configuration file automatically check box.
6. Click the “…” (Browse) button to select the configuration file to open or
type the path and filename in the Default configuration file box.
7. Click the OK button to save the changes.
Note: The real-time log session settings must already be saved to a config
-
uration file in order to accomplish these steps.
To specify the default configuration file using the Log Session Settings dialog:
1. Select the Setup option in the Datalog menu.
2. The Log Session Settings dialog is displayed.
3. Fill in all of the information on this dialog.
4. Click the Set as Default button. A prompt is displayed indicating that the
current settings must be saved to a configuration file. Click the Yes but
-
ton to save the current settings to a configuration file.
5. The Windows® Save As dialog is displayed to save the current settings
to a configuration file. Enter the filename for this configuration file and
click the OK button to save the settings to the file.
User’s Guide
208
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...