Loading ...
Loading ...
Loading ...
number of channels on this module. It also allows many module specific set
-
tings to be viewed and/or modified.
The Model box indicates the model number of this module. The Serial box in-
dicates the serial number assigned to this module. The Identification box indi-
cates the module name, number of devices, model number, serial number and
firmware version installed in this module. The Channels box indicates the num
-
ber of input channels on this module.
General module settings can be viewed and/or modified by selecting the Gen
-
eral tab. The Channels tab displays a list of the channels on this module and al
-
lows access to channel settings dialogs. The module calibration information can
be viewed and/or modified by selecting the Calibration tab.
After modifying any of the settings on this dialog, click the Apply or OK but
-
ton to write the new module settings to the thermometer readout. If the Apply
button is clicked, this dialog remains open. If the OK button is clicked, this dia
-
log closes after writing the settings.
LogWare has a feature that causes all of the module settings to be read back in
from the thermometer readout after the Apply button is clicked and the new set
-
tings have been written to the thermometer readout. This feature can be useful
to verify that the desired settings were properly applied to the thermometer
readout. To enable or disable this feature, see Section 5.6.4, Options.
To close this dialog without writing the module settings to the thermometer
readout, click the Cancel button.
127
4 Tools
Thermometer settings dialogs
Figure 100 2567 RTD Module Settings dialog
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...