Loading ...
Loading ...
Loading ...
•
After specified time elapses
The first method, By user, is the default setting.
To stop the real-time log session automatically:
1. Select the Setup option in the Datalog menu
2. The Log Session Settings dialog is displayed.
3. Select the Log Session tab.
4. Select the method to use to stop the real-time log session using the End
log drop-down list:
•
By user – Log session stops when the Stop option in the Datalog menu is
selected.
•
After specified number of readings – Log session stops automatically
when number of readings specified have been acquired on each channel.
• After specified time elapses – Log session stops automatically after the
specified time has elapsed.
5. Specify the End Log criteria:
• If the After specified number of readings option was selected, enter the
number of readings to be acquired on each channel in the After box.
• If the After specified time elapses option was selected, enter the amount
of time to elapse in the After box.
6. Click the Start button on the Log Session Settings dialog to start the log
session.
7. When the selected end log criteria are met, logging will stop
automatically.
Please refer to Section 2, Real-Time Logging, for more information.
6.4 Opening a configuration file automatically on
start-up
LogWare is designed to be flexible in the thermometer readouts that it can use
and the features it supports. However, most users of LogWare will probably al
-
ways use the same thermometer readout, scale and communication settings to
do all or most of their data acquisition.
For this reason, LogWare allows the real-time log session settings to be saved
to a configuration file. Opening the configuration file restores the settings,
therefore eliminating the need to manually configure LogWa re every time a
new log session is started.
207
6 How to
Opening a configuration file automatically on start-up
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...