Loading ...
Loading ...
Loading ...
LogWare has a feature that causes all of the thermometer readout settings to be
read back in from the thermometer readout after the Apply button is clicked
and the new settings have been written to the thermometer readout. This feature
can be useful to verify that the desired settings were properly applied to the
thermometer readout. To enable or disable this feature, see Section 5.6.4,
Options.
To close this dialog without writing the settings to the thermometer readout,
click the Cancel button.
Click the Help button to open the appropriate help topic for this dialog.
4.4.3.1 Filtering tab
Select the Filtering tab to view and/or modify the filter settings.
Check the Enable moving average filter box to enable the moving average filter.
This filter is sometimes also called a sliding window filter. When this box is
checked, the number of readings to average (size of window) must be entered
in the box provided. Enabling this option causes the thermometer readout to
display the average of the last n readings on a specific channel as the current
reading for that channel. If this feature is disabled, the most recent measure
-
ment on each channel is displayed as the current reading. The moving average
filter can be set to any value between 1 and 10.
User’s Guide
98
Figure 68 1560 Black Stack settings - Filtering tab
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...