Loading ...
Loading ...
Loading ...
Click the Help button to display the appropriate help topic for this dialog.
2.3.6 Statistics Settings dialog
The Statistics Settings dialog allows specific statistical functions to be enabled
or disabled for the selected channel.
To enable a statistical function for the selected channel, check the box next to
the appropriate function.
The statistical functions supported are:
• Minimum
• Maximum
• Spread
• Average
•
Standard deviation
•
Sliding window
If the Sliding window function is enabled, a value must be entered into the
Readings box. All other statistical values are calculated based on the most re
-
cent n measurements as indicated by the value in the Readings box. The read
-
ings setting can be set to any value between 10 and 1,000.
If the Sliding window function is disabled, the statistical values are calculated
based on all readings since the last reset was performed.
Once the statistics settings are complete, click the OK button to save these set
-
tings and close this dialog.
Click the Cancel button to discard any changes you have made and close this
dialog.
Click the Help button to display the appropriate help topic for this dialog.
User’s Guide
30
Figure 15 Statistics Settings dialog
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...