Loading ...
Loading ...
Loading ...
5.6.4.3 Tools tab
The Tools tab displays options pertaining to the Tools menu options.
The Allow editing instrument serial numbers option determines whether
LogWare will allow the serial number of the thermometer readouts to be
changed using the Thermometer Settings option in the Tools menu. If this op-
tion is checked, the Serial number boxes on the thermometer settings dialogs
are enabled (where applicable) and the serial number of the thermometer read-
out can be changed.
Note: Many Hart Scientific thermometer readouts save the thermometer
readout’s serial number in its memory. However, many thermometer read
-
outs still have their serial number set to 0. This option can be used to al
-
low the thermometer readout’s serial number to be set. Once the serial
number is set, this option should always be left off to prevent the serial
number from being changed to an incorrect setting.
Note: This option is protected by the administrator passcode. To change
this setting, the correct administrator passcode must be entered. For more
information, see Section 5.6.4.4, Admin. Passcode Tab.
The Read thermometer settings after applying changes option determines
whether LogWare will query the thermometer readout for current settings after
new settings have been applied. This option is used on the thermometer settings
dialogs which are accessible from the Thermometer Settings option.
User’s Guide
198
Figure 152 LogWare Options - Tools tab
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...