Loading ...
Loading ...
Loading ...
4.4.5.6 1590 Super-Thermometer II/2590 ‘Mighty Mux II’ Channel Settings di
-
alog
The 1590 Super-Thermometer II/2590 ‘Mighty Mux II’ Channel Settings dia
-
log displays information about the selected PRT/Thermistor channel.
Some or all of the settings on this dialog may be passcode protected. If so, a
message appears at the bottom of the Probe tab and/or Calibration tab and the
Edit button is displayed. The protected controls are disabled. To edit the pro
-
tected settings, click the Edit button and enter the current passcode for the ther
-
mometer readout. If the correct passcode is entered, the protected controls are
enabled and the values may be changed. The controls remain enabled until this
dialog is closed or until the current changes are applied by clicking the Apply
button.
Select the probe to be assigned to this channel using the Probe selection
drop-down list. The Model 1590 Super-Thermometer II readout can hold infor
-
mation for up to 56 probes simultaneously. Any one of these probes can then be
assigned to any channel.
When a new probe is selected, the current settings for that probe are read in
from the thermometer readout. A progress dialog is displayed while the probe
settings are being read in.
After modifying any of the settings on this dialog, click the Apply or OK but
-
ton to write the new settings to the thermometer readout. If the Apply button is
157
4 Tools
Thermometer settings dialogs
Figure 126 1590 Super-Thermometer II/2590 ‘Mighty Mux II’ Channel
Settings dialog
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...