Loading ...
Loading ...
Loading ...
tings have been written to the thermometer readout. This feature can be useful
to verify that the desired settings were properly applied to the thermometer
readout. To enable or disable this feature, see Section 5.6.4, Options.
To close this dialog without writing the module settings to the thermometer
readout, click the Cancel button.
Click the Help button to open the appropriate help topic for this dialog.
4.4.3.7.1 General tab
Select the General tab to view and/or modify general module settings.
Select the excitation current for this module using the Excitation current
drop-down list. The 2562 module can use either a 1 mA or a 1.414 mA excita-
tion current. This setting applies to all channels on this module.
Select the resistance range for this module using the Resistance range
drop-down list. The 2562 module allows the selection of either Auto, High or
Low. This setting applies to all channels on this module.
Select the front row wires option for this module using the Front row wires
drop-down list. The 2562 module allows the selection of either 4-wire or
3-wire. This setting applies only to the four channels on the front row of this
module.
Select the rear row wires option for this module using the Rear row wires
drop-down list. The 2562 module allows the selection of either 4-wire or
3-wire. This setting applies only to the four channels on the rear row of this
module.
109
4 Tools
Thermometer settings dialogs
Figure 81 2562 PRTS Module Settings - General tab
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...