Loading ...
Loading ...
Loading ...
button on the toolbar. This dialog is also displayed after opening a log session
configuration file.
Note: This dialog displays the current real-time log session settings.
Clicking the Close button on this dialog does not cause these settings to be
lost. To display this dialog again, select the Setup option in the Datalog
menu.
This dialog has three tabs: Thermometer, Log Session and Channels. All of the
information on each of these tabs must be configured before a real-time log
session can be started. The following sections describe in detail each of the set
-
tings on these tabs.
Once the log session has been completely configured, the settings can be saved
to a configuration file by clicking the Save As button. If these same settings
may be used again at a later date, saving the settings to a configuration file
greatly reduces the amount of time required to get a log session started.
When clicking the Save As button, the Windows® Save As dialog is displayed.
The \Config folder should be selected by default (or the folder that is specified
for configuration files on the LogWare Options dialog). Real-time log session
configuration files are saved with a .rls extension. To cancel saving a configu
-
ration file, click the Cancel button. Otherwise, enter the filename for the config
-
uration file and click the Save button. For more details about the real-time log
session configuration file, refer to Section 7.1.1, Log Session Configuration
File. Real-time log session configuration files can also be saved by selecting the
Save As option in the File menu.
17
2 Real-time logging
Log session settings dialog
Figure 9 Log Session Settings dialog
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...