FLUKE 9935-S LogWare II Software

User Manual for the Fluke 9935-S LogWare II Software - Page 211

For 9935-S.

PDF File Manual, 275 pages, Read Online | Download pdf file

9935-S photo
Loading ...
Loading ...
Loading ...
The Change Admin. Passcode button allows the administrator passcode to be
setup or changed.
Note: The administrator passcode in LogWare is completely independent
of the thermometer readout passcodes. The administrator passcode is used
by LogWare to protect certain LogWare options and default settings on the
LogWare Options dialog only! Thermometer readout passcodes are spe
-
cific to the thermometer readout being used and are required to change
certain settings in the thermometer readout itself.
If an administrator passcode has already been setup, the current passcode is re
-
quired to gain access to the Change Passcode dialog and clicking the Change
Admin. Passcode button displays the Enter Passcode dialog first. The current
administrator passcode must be entered to enable changing the administrator
passcode. Enter the current administrator passcode and click the OK button to
continue. If the passcode entered does not match the current administrator
passcode, a message is displayed and access is denied. Otherwise, if the correct
passcode is entered, the Change Passcode dialog is displayed.
To change the current administrator passcode, enter the new passcode in the
New passcode box. Then confirm the new passcode by entering the passcode
again in the Confirm passcode box. Click the OK button to save the new
passcode. To disable passcode protection, simply leave the New passcode and
Confirm passcode boxes blank and click the OK button. To cancel changing the
current passcode, click the Cancel button.
201
5 Menus
Tools menu
Figure 155 Change Passcode dialog
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...