Loading ...
Loading ...
Loading ...
4. Click the Change Admin. Passcode button to setup or change the admin
-
istrator passcode.
5. If a passcode has already been setup, the current passcode is required
and must be entered. The Enter Passcode dialog is displayed. Enter the
current administrator passcode in the Passcode box and click OK to
continue.
6. The Change Passcode dialog is displayed. Enter the new administrator
passcode in the New passcode box. Enter the passcode again in the Con
-
firm passcode box. Click the OK button to accept the new passcode or
click Cancel to abort setting the new passcode.
Note: DO NOT FORGET THE ADMINISTRATOR PASSCODE! Write
it down and keep it in a safe place. Only reveal the passcode to users who
are authorized to change the protected settings!
Once an administrator passcode has been configured, certain features and set
-
tings are disabled and can only be changed after the administrator passcode has
been entered.
To gain access to passcode protected settings:
1. Select the Options option in the Tools menu.
2. The LogWare Options dialog is displayed.
3. Select the Admin. Passcode tab.
4. Click the Edit Protected Options button to enter the administrator
passcode.
5. The Enter Passcode dialog is displayed. Enter the current administrator
passcode in the Passcode box and click the OK button to continue.
6. If the entered passcode is correct, the features and settings on the
LogWare Options dialog are enabled and may be changed. These settings
are only enabled until this dialog is closed.
The administrator passcode can also be removed from LogWare, which permits
anyone to change any of LogWare’s options.
To remove the administrator passcode:
1. Select the Options option in the Tools menu.
2. The LogWare Options dialog is displayed.
3. Select the Admin. Passcode tab.
4. Click the Change Admin. Passcode button to setup or change the admin
-
istrator passcode.
217
6 How to
Setting up an administrator passcode
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...