Loading ...
Loading ...
Loading ...
6. A prompt is then displayed indicating that this configuration file will be
made the default configuration file. Click the Yes button to set this con
-
figuration file as the default. A message is displayed indicating the cur
-
rent configuration is now set as the default.
7. Click the Close button to close the Log Session Settings dialog.
Test this feature to make sure it works properly by closing LogWare and run
-
ning it again. The thermometer readout must be connected and powered on
when opening a configuration file so that LogWare can verify that the informa
-
tion in the configuration file matches the thermometer readout configuration.
The Log Session Settings dialog should be displayed with all of the configura
-
tion information filled in.
To disable opening the configuration file on start-up, uncheck the Open default
configuration file automatically check box on the LogWare Options dialog.
Please refer to Section 5.6.4, Options, for more information.
6.5 Changing thermometer and probe settings
LogWare provides a feature which allows many of the thermometer readout and
probe settings to be read in, viewed, modified and written back out to the ther-
mometer readout. These settings vary from thermometer readout to thermome-
ter readout but include:
• Filtering (averaging)
• Resolution
• Calibration and recalibration dates
• Calibration constants
•
Probe serial number
•
Probe wires and excitation current
•
Probe calibration and recalibration dates
•
Probe conversion type and calibration coefficients
Note: In order to use this feature of LogWare, the thermometer readout
must have a recent firmware version. If your thermometer readout does
not have a recent firmware version, it may be upgraded. For more details,
contact Hart Scientific Technical Support. Please refer to Section 1.4.4,
Firmware Requirements, for more details.
To view, modify and write thermometer and probe settings:
1. Select the Thermometer Settings option in the Tools menu.
2. The Select Model dialog is displayed. Select the thermometer readout
model. Also, select the COM port to which the thermometer readout is
connected and the baud rate to use. Make sure LogWare can communi
-
209
6 How to
Changing thermometer and probe settings
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...