Loading ...
Loading ...
Loading ...
Select the number of points to use for the Temperature/Voltage table using the
Number of points drop-down list. The choices are from 1 to 10 but may be lim
-
ited depending on the thermometer readout being used.
Up to ten Temperature/Voltage pairs can be entered. Enter the temperature and
voltage values at each temperature in the boxes provided. The units for the tem
-
perature and voltage values are indicated next to each box.
Select the Open button to display the Windows® Open dialog to open a previ
-
ously saved configuration file which contains Thermocouple Table coefficients.
Select the Save As button to display the Windows® Save As dialog to save the
current Thermocouple Table coefficients to a configuration file.
Click the OK button to accept the current coefficients and close this dialog.
Click the Cancel button to discard any changes you have made and close this
dialog.
Click the Help button to display the appropriate help topic for this dialog.
9.11 Thermocouple Type Settings dialog
The Thermocouple Type Settings dialog allows the Type, Temperature and Off-
set values, and DC1 & DC2 coefficients to be entered.
If the Thermocouple Type coefficients were read in from the thermometer read
-
out, the boxes are filled with the current coefficient values and settings.
The Type drop-down list allows the standard thermocouple type to be selected.
Thermocouple types include: B, E, J, K, N, R, S, T and AuPt. The choices in
User’s Guide
252
Figure 183 Thermocouple Polynomial Settings dialog
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...