Loading ...
Loading ...
Loading ...
If the selected conversion type requires coefficients or other settings, the Con
-
version Settings button is enabled. Click the Conversion Settings button to dis
-
play the dialog for the selected conversion type. Otherwise, the Conversion
Settings button is disabled. Please refer to Section 9, Conversion Settings
Dialogs, for a detailed description of the Conversion Settings dialogs.
Note: The conversion settings are not written to the thermometer readout
until the Apply or OK button is clicked on this dialog!
4.4.4 1575A Super-Thermometer Settings
The 1575A Super-Thermometer Settings dialog displays information about the
thermometer readout including model number, identification information and
the total number of channels. It also allows many thermometer readout settings
to be viewed and/or modified.
The 1575A Super-Thermometer readout must be connected to an available
COM port and the communication settings must be properly configured so that
this information can be read in from the thermometer readout. If communica
-
tion with the thermometer readout is not successful, an error message is dis
-
played and this dialog is blank. A progress dialog is displayed while the current
thermometer readout settings are being read in.
137
4 Tools
Thermometer settings dialogs
Figure 112 1575A Super-Thermometer Settings dialog
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...