Loading ...
Loading ...
Loading ...
4.4.6.8 1594A/1595A Hart Super-Thermometer Rs Settings dialog
The 1594A/1595A Hart Super-Thermometer Rs Settings dialog displays refer
-
ence resistor information pertaining to the current channel selection.
The settings on the Rs Settings dialog may be passcode protected. If they are, a
message appears at the bottom of the dialog and the Edit button is displayed.
The controls on this dialog are disabled, except the Resistor ID. To edit the re-
sistor settings, click the Edit button and enter the current passcode for the ther-
mometer readout. If the correct passcode is entered, the controls are enabled
and the values may be changed.
Select the resistor to be assigned to this Rs channel using the Resistor ID selec
-
tion drop-down list. The Model 1594A/1595A Hart Super-Thermometer read
-
out can hold information for up to 50 resistors. Any one of these resistors can
then be assigned to any Rs channel.
When a different resistor is selected, the current settings for that resistor are
read in from the thermometer readout. A progress dialog is displayed while the
probe settings are being read in.
After modifying any of the settings on this dialog, click the Apply or OK but
-
ton to write the new settings to the thermometer readout. If the Apply button is
clicked, this dialog remains open. If the OK button is clicked, this dialog closes
after writing the settings.
To close this dialog without writing the channel settings to the thermometer
readout, click the Cancel button.
Click the Help button to open the appropriate help topic for this dialog.
Use the Type drop-down list to select the probe type for the selected probe.
Possible probe types are PRT, Thermistor or Resistor.
User’s Guide
170
Figure 136 1594A/1595A Hart Super-Thermometer Rs1 settings
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...