Loading ...
Loading ...
Loading ...
the total number of channels. It also allows many thermometer readout settings
to be viewed and/or modified.
The 1590 Super-Thermometer II readout must be connected to an available
COM port and the communication settings must be properly configured so that
this information can be read in from the thermometer readout. If communica
-
tion with the thermometer readout is not successful, an error message is dis
-
played and this dialog is blank. A progress dialog is displayed while the current
thermometer readout settings are being read in.
The Model box indicates the model number of the thermometer readout. The
Identification box indicates the model number and firmware version installed in
this thermometer readout. The Channels box indicates the total number of input
channels on this thermometer readout.
The filtering settings can be viewed and/or modified by selecting the Filtering
tab. The sampling settings can be viewed and/or modified by selecting the Sam
-
pling tab. The measurement settings can be viewed and/or modified by select
-
ing the Measurement tab. The Channels tab displays a list of channels and
allows access to channel settings dialogs. The thermometer readout calibration
information can be viewed and/or modified by selecting the Calibration tab.
The settings on each of these tabs are described in detail in the following sec
-
149
4 Tools
Thermometer settings dialogs
Figure 120 1590 Super-Thermometer II Settings dialog
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...