Loading ...
Loading ...
Loading ...
Enter the resolution for resistance readings in the Resistance box provided or
use the up/down buttons. The resistance resolution can be set to any value be
-
tween 0 and 8 digits (places after decimal point).
Enter the resolution for ratio readings in the Ratio box provided or use the
up/down buttons. The ratio resolution can be set to any value between 0 and 8
digits (places after decimal point).
4.4.5.3 Measurement tab
Select the Measurement tab to view and/or modify measurement settings.
Use the Channel mode drop-down list to select the channels to take measure
-
ments from. The channel mode can be set to one of the following options:
•
Alternate input 1/input 2
•
Input 1
•
Input 2
•
Scanner channel (only if Model 2590 ‘Mighty Mux II’ Multiplexer(s)
is/are connected)
•
Scanner sequence (only if Model 2590 ‘Mighty Mux II’ Multiplexer(s)
is/are connected)
If the channel mode is set to Alternate Input 1/Input 2, Input 1 or Input 2, the
scanner channel and scanner sequence mode settings are not applicable and are
disabled. If the channel mode is set to Scanner channel, the Scanner channel
setting is enabled. If the channel mode is set to Scanner sequence, the scanner
sequence mode setting is enabled.
153
4 Tools
Thermometer settings dialogs
Figure 123 1590 Super-Thermometer II Settings -
Measurement tab
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...