Loading ...
Loading ...
Loading ...
tions. For more details on these settings, please refer to the thermometer read
-
out’s User’s Guide.
If any of the settings on the 1590 Super-Thermometer II Settings dialog are
passcode protected, a message appears at the bottom of the appropriate tab and
the Edit button is displayed. The controls for the passcode protected settings
are disabled. To edit the protected settings, click the Edit button and enter the
current passcode for the thermometer readout. If the correct passcode is en
-
tered, the controls are enabled and the values may be changed. The controls re
-
main enabled until this dialog is closed or until the current changes are applied
by clicking the Apply button.
After modifying any of the settings on this dialog, click the Apply or OK but
-
ton to write the new settings to the thermometer readout. If the Apply button is
clicked, this dialog remains open. If the OK button is clicked, this dialog closes
after writing the settings.
LogWare has a feature that causes all of the thermometer readout settings to be
read back in from the thermometer readout after the Apply button is clicked
and the new settings have been written to the thermometer readout. This feature
can be useful to verify that the desired settings were properly applied to the
thermometer readout. To enable or disable this feature, see Section 5.6.4,
Options.
To close this dialog without writing the settings to the thermometer readout,
click the Cancel button.
Click the Help button to open the appropriate help topic for this dialog.
4.4.5.1 Filtering tab
Select the Filtering tab to view and/or modify the filter settings.
User’s Guide
150
Figure 121 1590 Super-Thermometer II Settings - Filtering tab
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...