Loading ...
Loading ...
Loading ...
After the thermometer readout model and communication settings have been
selected, the appropriate Log Status dialog for the selected thermometer read
-
out is displayed. The Log Status dialogs are described in more detail in Section
3.4, Log Status Dialogs.
3.2 Select Model dialog
When any of the Download menu options is selected, the Select Model dialog
is displayed. LogWare needs to know the model of the thermometer readout to
interface with.
If this dialog has been used previously to select a thermometer readout model
and communication settings, the previous settings are restored.
Use the Model drop-down list to select the type of thermometer readout being
used. All other controls on this dialog are disabled until a model is selected.
The list of available thermometer readouts depends on the Download menu op
-
tion selected. Only thermometer readouts that support the selected feature are
listed.
Select the COM port on the computer to which the thermometer readout is con
-
nected using the COM port drop-down list. Only COM ports that the operating
system reports as being available can be used. The following symbols are used
to show the status of each COM port:
•
- Indicates a COM port that is currently available.
•
- Indicates the COM port that is currently selected by LogWare.
•
- Indicates a COM port that is currently being used by another appli
-
cation.
•
- Indicates an IR port (virtual COM port) that is currently available.
User’s Guide
48
Figure 28 Select Model dialog
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...