Loading ...
Loading ...
Loading ...
[Note:]
・[MULTI] [Camera selection] can be selected only for Multi-directional cameras.
・[MULTI] This item is not displayed when [Image capture mode] is in quad/dual
mode.
・[MULTI] For [Common(Cam. 1-2)], [Super Dynamic], [Light control mode],
[White balance], and [Intelligent Auto] can be set only for items that have not
been developed in detail. To perform other advanced settings, select each camera.
[JPEG]
Configure the JPEG [Image capture size] [Image quality] [Transmission interval].
・
[Image capture size]
When displaying JPEG images, select the resolution of the images to be displayed.
・
[Image quality]
Set the quality of JPEG images at each resolution.
・
[Refresh interval(JPEG)]
Select the rate at which the JPEG image is updated from the following.
3.4 [Image quality] for setting image quality
On the [Image quality] tabs, you set image quality.
For a detailed explanation of the settings and notes for setting, refer to the [Image quality] tabs on
the image/audio pages in the detailed settings.
→4.6.4 [Image quality] to set the image quality
[Image quality]
You can set various image quality adjustments such as brightness and sharpness level.
・
[Camera selection]
Select the camera to set the image quality.
・[Common(Cam. 1-2)]: Sets the same settings for the cameras.
・[Camera 1]: Sets camera 1 image quality.
・[Camera 2]: Sets camera 2 image quality.
・[Camera 3]: Sets the image quality of camera 3.
・[Camera 4]: Sets camera 4 image quality.
・
[Brightness]
Adjust the brightness.
3 Setting
3.4 [Image quality] for setting image quality
92
Loading ...
Loading ...
Loading ...