Loading ...
Loading ...
Loading ...
[Note:]
・The size is only a guide. Depending on the environmental conditions and tracking
conditions, the assumed size may not be achieved.
・Increasing the size of the object to be tracked reduces the tracking performance.
[Note:]
・The lower the sensitivity, the less false detection due to wooden shaking, but the
lower the tracking performance. On the other hand, higher sensitivity improves
tracking performance, but it also increases false detection. Set according to the
environment.
[Note:]
・After the maximum tracking time, the camera stops in that position. When the
auto mode operation is restored, the self-return time is counted and the auto
mode operation is restored after the tracking is stopped by setting the self-return.
[Bicycle]:Automatic tracking is performed when a motorcycle is detected.
[Object size]
Select the size at tracking from the following.
[Small (1/4 of the image)]:Zoom the tracking object to the monitor screen up to about 1/4
(vertical) size.
[Medium (1/2 of the image)]:Zoom the tracking object to the monitor screen up to about 1/2
(vertical) size.
[Large (3/4 of the image)]:Zoom the tracking object to the monitor screen up to approximately
3/4 (vertical) size.
[No size adjustment]:Zoom control is not performed during tracking.
[Sensitivity]
Select the sensitivity during tracking from the following.
[High]/[Middle]/[Low]
[Longest tracking time]
Select the time from below from the start of auto-tracking to forced termination.
[Off(Unlimited)]/[10s]/[20s]/[30s]/[40s]/[50s]/[1min]/[2min]/[3min]/[5min]/[10min]
[Auto track data in video stream]
Select whether to send the superimposed image data by adding auto-tracking information to the
image.
4 Advanced settings
4.7 Set PTZ
248
Loading ...
Loading ...
Loading ...