Loading ...
Loading ...
Loading ...
[Note:]
・[MULTI] This item is not displayed when [Image capture mode] is in Quad/Dual
mode or Panorama mode.
[Note:]
・[MULTI] This item is not displayed when [Image capture mode] is in Quad/Dual
mode or Panorama mode.
[Important]
・If you want to enter a hostname for [Destination address], you must configure the
DNS on the [Network] tab of the network page.
→4.10.1 Networking [Network]
・Make sure that the notification destination is set correctly. If the notification
destination does not exist, a proprietary alarm notification delay or transmission
failure may occur.
Input Characters:One-byte alphanumeric and one-byte symbols: . _ ‑
To delete the specified notification destination, press [Delete] for the notification destination to
be deleted.
[Notification per Camera]
ON/OFF is used to specify whether or not to execute the transmission setting by camera.
When [Notification per Camera] is set to [On], [Camera No.] is notified when [Camera No.]
matches the number of the camera that generated the operation detection alarm or when [Camera
No.] matches the camera number of the clicked live display.
[camera No.]
Settable range: 1 to 4
[Notification per VMD area]
ON/OFF is used to set whether the operation detection area-specific transmission is set.
When [Notification per VMD area] is set to [On], alarm notification is executed only when [Alarm
Area No.] matches the [Alarm area] number set for the operation detection alarm. Alarm
notification other than the operation detection alarm is not performed. When using the operation
detection area-specific transmission function, set the alarm area status for operation detection to
[On].
[Alarm area No.]
Settable range:1～8
4 Advanced settings
4.8 [Alarm] to set the alarm
287
Loading ...
Loading ...
Loading ...