Loading ...
Loading ...
Loading ...
[Note:]
・When [Image capture mode] is in Quad/Dual mode, the camera cannot be selected.
[Important]
・If you turn on the VIQS setting and then change the [Image capture mode] and
[Basic] tab [Image rotation] on the [Image] tab of the video and audio pages, the
VIQS area may be misaligned. Be sure to check the VIQS settings again.
[Note:]
・Refer to the following procedure for setting the VIQS area.
→4.6.4.7 Set up the VIQS area
・If the [Stream transmission] of the relevant stream is set to [Off], you cannot
press the [Execute] buttons for selecting the stream.
[Area]
When the VIQS area is selected in the image, it is set from Area 1.
[Status]
Set the VIQS area with [On] and [Off].
[On]:Set the VIQS area.
[Off]:Do not configure the VIQS area.
[Delete]
Click the button of the area to delete to delete the area frame.
[Level]
Sets the level difference between the quality in the specified range and the quality outside the
specified range. The larger the level difference, the lower the image quality outside the specified
range and the smaller the image data size.
[0:Minimum]/1/2/3/4/[5:standard]/6/7/8/[9:maximum]
Stream selection
Use [On]/[Off] to specify whether the VIQS function is enabled for images delivered to streams.
The [Execute] buttons allow you to view images of individual streams.
4.6.4.7 Set up the VIQS area
Set the VIQS area as follows.
1 Drag the mouse on the image and specify the area. You can specify up to 8 areas.
The specified location is set to Area [1(White)], and a frame is displayed.
4 Advanced settings
4.6 [Image/Audio] for setting images and sound files
219
Loading ...
Loading ...
Loading ...