Loading ...
Loading ...
Loading ...
[Note:]
・[MULTI_PTZ] Only Multi-directional cameras with integrated Multi-directional/
PTZ cameras can be set to [Action at the time of a command alarm].
[Off]:The product does not operate in conjunction with the command alarm.
1～256:Selecting the preset position registered in advance moves the camera to the position when
a command alarm is detected.
[Patrol 1]:When a command alarm is detected, a patrol is started. *When Patrol 1 is not
registered, it is not displayed.
Source-specific preset position:Register the address of the sender of the command alarm and the
preset position corresponding to that address, and move to that position when the alarm is
detected by the command alarm.
When [Preset per sender] is clicked, a separate window opens showing the settings for the
source-specific preset position.
→4.8.4.1 Set the preset position by source (screen for setting preset position by source)
Command Alarm Action-Source Address
The IP address of the PTZ camera for the Multi-directional/PTZ integrated camera is displayed.
Operation at Command AlarmInterlocked operation
Select the action linked to the command alarm when received from the following.
[Off]:Interlock operation is not performed even if a command alarm is received.
[Alarm interlock]:Alarm operation is performed after the command alarm is received.
[Switching between black and white]:Switches between black and white after receiving the
command alarm.
[Automatic Time Adjustment]:Adjusts the time after the command alarm is received.
[Alarm E-mail notification]
When [E-mail notification setup] is clicked, the setting window for the e-mail when the alarm is
generated is displayed in a separate window.
→4.8.4.2 Mail sending when an alarm is generated
[Alarm image FTP/SFTP transmission]
When [FTP/SFTP setup] is clicked, a separate window is displayed for FTP/SFTP sending when
an alarm is generated.
→4.8.4.3 Set up FTP/SFTP transmission when an alarm is generated
[Alarm image recording(SD memory card)]
When [SD memory card setup] is clicked, the settings for recording to the SD Memory Card when
an alarm is generated are displayed in a separate window.
4 Advanced settings
4.8 [Alarm] to set the alarm
263
Loading ...
Loading ...
Loading ...