Loading ...
Loading ...
Loading ...
[Note:]
・Flicker caused by fluorescent lamp may occur when intelligent auto is activated.
In this case, set one of the following settings.
Adjust the [Motion priority level] slider bar to [-].
Change [Light control mode] to [Indoor scene(50Hz)] or [Indoor scene(60Hz)].
・When intelligent auto is activated, the brightness of the entire image may change
due to changes in some subjects. In such cases, adjust the [Face priority level]
slider bar to [-].
・[MULTI4] [MULTI3] When intelligent auto is activated, the maximum frame rate
is limited to 7.5 fps in 15 fps mode and 6.25 fps in 12.5 fps mode regardless of the
frame rate.
[Note:]
・If [Intelligent Auto] is set to [On], this item cannot be set.
[Note:]
・If [Fog compensation] is set to [On], this item cannot be set.
increases dark subject noise.
Moving the slider bar in the [-] direction tends to blur the moving subject but reduces the dark
subject noise. Press [Reset] to return to the default settings.
Advanced settings
[Auto contrast adjust]
Use [On] or [Off] to set the auto-contrast adjust function.
[On]:Activate the automatic contrast adjustment function.
[Off]:Stops the automatic contrast adjustment function.
[Contrast level]
Adjust the contrast intensity.
Move the slider bar in the [+] direction to increase the contrast of the image.
Move the slider bar in the [-] direction to reduce the image contrast.
Press [Reset] to return to the default settings.
[Adaptive black stretch]
4 Advanced settings
4.6 [Image/Audio] for setting images and sound files
199
Loading ...
Loading ...
Loading ...