Loading ...
Loading ...
Loading ...
[Note:]
・You must add a Windows component to view shortcuts to the cameras in the
Windows [Network] folder. Enable UPnP by referring to the following.
Start > [Set] > Network and Internet > Ethernet > Network and Sharing Center >
Enable Network Discovery in Change Shared Advanced Settings > Click Save
Change.
[Note:]
・[MULTI_PTZ] When the HTTPS connection is accessed, only the camera
accessed is protected.
[Note:]
・To connect to HTTPS when HTTP is selected, first configure the HTTPS
connection. The HTTPS connection is enabled even if the setting is changed to
HTTP.
・When accessing the camera with HTTPS, the display speed of the screen and the
frame rate of the movie may decrease.
・When accessing the camera with HTTPS, it may take a long time before the
image is displayed.
,
Select [On] to shortcut the cameras.
To use the camera shortcut function, enable the UPnP function on the PC beforehand.
4.10.2.5 Set up HTTPS
By using the HTTPS function, you can encrypt the access to the camera and increase the security
of communication.
For details on how to configure HTTPS, see below.
→4.10.3 Setting up HTTPS
[HTTPS−Connection]
Set the connection method to the machine.
HTTP:HTTP and HTTPS connections are enabled.
HTTPS:Only the HTTPS connection is enabled.
Select the TLS to be used when HTTPS is selected.
TLS1.1:Enable/disable.
TLS1.2、 TLS1.3:It is always valid and cannot be set to invalid.
4 Advanced settings
4.10 Networking configuration [Network]
328
Loading ...
Loading ...
Loading ...