Loading ...
Loading ...
Loading ...
[Important]
• When using the SNMP feature on SNMPv1/v2, be sure to enter a community
name. If the community name is blank, you cannot use the SNMP feature. Do not
set a community name that can be easily guessed. (e.g., public)
[Note:]
You can restrict the IP address of the SNMP manager to allow requests per subnet
by entering the IP address/Mask length of the subnet.
For example, if you enter [192.168.0.1/24], SNMP manager requests from
[192.168.0.1] to [192.168.0.254] are allowed.
SNMPv1/v2 − [Manager address]
When the SNMP version is v1 and v2, enter the IP address of the SNMP manager that allows
requests. If blank, allow requests from all IP addresses.
Number of characters that can be entered:1 to 128 characters
Input Characters:One-byte alphanumeric and one-byte symbols : . /
[SNMPv3] − [User name (1 to 32 characters)]
Set the SNMPv3 username.
Number of characters that can be entered:Blank or 1 to 32 characters
Characters that cannot be entered:Double-byte and single-byte symbols " & : ; ¥
[SNMPv3]−[Authentication]
Select the SNMPv3 authentication method from MD5/SHA1.
[SNMPv3] − [Encryption method]
Select the SNMPv3 encryption method from DES/AES.
[SNMPv3] − [Password (8 to 16 characters)]
Set the SNMPv3 password.
Number of characters that can be entered:
-if the authentication method is MD5: blank or 8-16 characters
-if the authentication method is SHA1: blank or 8-20 characters
Characters that cannot be entered:Double-byte and single-byte symbols " &
SNMPv2-MIB system setting
[System name]
Enter the device name to manage the machine using the SNMP function.
Number of characters that can be entered:0 to 32 characters
Characters that cannot be entered:Double-byte
4 Advanced settings
4.10 Networking configuration [Network]
332
Loading ...
Loading ...
Loading ...