Loading ...
Loading ...
Loading ...
[Note:]
・The howling may occur depending on the operating conditions. In this case, do
not allow the sound output from the PC to enter the microphone of the PC.
・[Audio recording] cannot be used when [Audio transmission mode] is set to
[Interactive(Half-duplex)].
・When using live picture pages, use HTTPS to access live picture pages.
[Note:]
・The shorter the call interval, the shorter the delay time. Increasing the value
lengthens the delay time but reduces speech interruption. Change the settings
depending on your network environment.
・If [AAC-LC] is selected in [Audio input encoding format], [Mic input interval
(Camera to PC)] cannot be selected.
[AAC‑LC]:64kbps/ 96kbps/ 128kbps
Voice delivery
[Audio transmission mode]
Set the communication mode for sending/receiving voice data between the computer and PC from
the following.
[Off]:Audio data is not transmitted or received between the computer and the PC.
[Mic input]:The PC receives audio data from the computer. You can hear sound together with
images on a PC. Images and sound are not synchronized.
[Audio output]:The audio data from the PC is transmitted to the computer. Audio can be played
through a speaker connected to the computer.
[Interactive(Half-duplex)]:You can make both listening and outgoing calls. However, audio cannot
be sent/received simultaneously.
[Interactive(Full-duplex)]:You can both listen and talk at the same time.
[Mic input interval (Camera to PC)]
Select the voice reception interval from the following.
[20ms]/ [40ms]/ [80ms]/ [160ms]
[Audio output volume (PC to Camera)]
Sets the volume to which the sound from the PC is played from the computer.
[High]/[Middle]/[Low]
[Audio output interval (PC to Camera)]
Select the voice transmission interval from the following.
[160ms]/ [320ms]/ [640ms]/ [1280ms]
4 Advanced settings
4.6 [Image/Audio] for setting images and sound files
223
Loading ...
Loading ...
Loading ...