Loading ...
Loading ...
Loading ...
[Note:]
・The names of [AUX], [Open], and [Close] can be changed.
→4.8.3 [Alarm] to change the aux name
[Note:]
・The alarm notification is not linked to the alarm notification operation such as
recording to the SD Memory Card or mail transfer. Check the respective
operation settings.
[Close] buttons:The AUX terminal will be closed.
⑱[Camera Control Panel]-[Playback of recording (Log disp.)]
Clicking [Start] displays the log list and plays back the images stored on the SD Memory Card.
Please refer to the following for details of the log list and how to play back the image.
→2.7 Display the log list
⑲[[Camera Control Panel]-[Record/Play (SD Memory Card)]
This can only be set when [Save trigger] is set to [Manual] on the [SD memory card] tabs.
You can manually save images to SD Memory Cards by clicking [Start]. To manually save
images on the SD Memory Card, refer to the following.
→2.5 Manually save images on the SD memory card
⑳[Set] buttons(
)
You can view or hide the setting panel.
→3 Setting
㉑[Alarm notification]
When an alarm is generated, it is displayed as a popup. Clicking the [X] button resets the
output terminal and the display disappears.
→2.6 Operation when alarm is generated
㉒[View Stream Information]
Displays the compression method, resolution, and frame rate of live video.
㉓[Main area]
Displays the camera image.
The current date and time are displayed according to the set [Time display format] and
[Date/time display format].
→4.5.1 [Basic] to perform basic settings
The set text is displayed on the screen. The number of lines is two.
When H.265 is displayed, when the bit rate is high, it may be displayed at the refresh interval.
2 Operation
2.3 Viewing images from a PC
28
Loading ...
Loading ...
Loading ...