Loading ...
Loading ...
Loading ...
[Note:]
・The maximum magnification of the EX zoom depends on the model and the [Image
capture mode] you are configuring.
・Refer to the catalog specifications for the maximum magnification of each model.
・In the [Manual zoom adjustment] Buttons, When you press buttons, [Zoom
ratio designation] cannot be operated. To perform [Zoom ratio designation], click
the "Read" button or click the X1 button on the [Manual zoom adjustment].
[Important]
・When EX optical zoom is set with the VIQS area, privacy zone, operation
detection area, undesired detection area, and mask area set, the position is
misaligned. Therefore, set the EX optical zoom and then set each area.
→4.6.4.6 Set up VIQS
→4.6.4.5 Setting the privacy zone (Privacy zone setting screen)
→4.8.5 [VMD area] for setting motion detection
→4.8.7 [SCD area] to set up undesired detection
→4.6.4.2 Set the mask area
[Note:]
・One-click on the [Near] or [Far] buttons may appear to have no change in focus
due to trace adjustments. If you want to move the focus position large, press and
hold the button for a long time.
[Manual zoom adjustment]
Adjust the zoom manually.
Adjust the zoom factor to 1.0 times in the [Wide Angle] direction.
Zoom (magnification) is 1.0 times.
: Adjust the zoom factor in the [Telescope] direction.
[Manual focus adjustment]
Adjust the focus manually.
[Near]: Adjust the focus to the [Near].
[Reset] returns focus (focus) to its default settings.
[Far]: Adjust the focus to the [Far].
[Focus area setting]
When auto focus is executed, you can specify the object in the frame where you want to adjust the
focus.
If not, adjust the focus to the object in the center area of the window.
4 Advanced settings
4.6 [Image/Audio] for setting images and sound files
207
Loading ...
Loading ...
Loading ...