Loading ...
Loading ...
Loading ...
[Note:]
・[PTZ] Up to four areas can be set for each preset position (up to 256).
・[PTZ] You can also set the alarm operation when the camera is at a position other
than the preset position.
・[MULTI] Up to four areas can be set for each camera.
4.8.4.5 Sets unique alarm notification when an alarm is generated.
On the [Alarm] tab of the Alarm page, press [TCP alarm notification setup] in [Camera action on
alarm].
→4.8.1 [Alarm] to set alarm operation
Refer to the following for the setting method.
→4.8.10.1 Set unique alarm notification
4.8.4.6 Sets HTTP alarm notification when an alarm is generated.
On the [Alarm] tab of the Alarm page, press [HTTP alarm notification setup] in [Camera action on
alarm].
→4.8.1 [Alarm] to set alarm operation
Refer to the following for the setting method.
→4.8.10.2 Set the HTTP alarm notification
4.8.4.7 Set SNMP transmission when an alarm is generated.
On the [Alarm] tab of the Alarm page, press [To SNMP setting] in [Camera action on alarm].
→4.8.1 [Alarm] to set alarm operation
Refer to the following for the setting method.
→4.10.2.7 Set SNMP
4.8.5 [VMD area] for setting motion detection
Click [VMD area] on the Alarm page. Refer to the following how to display and operate the
Advanced menu.
→4.2.1 How to display
→4.2.2 How to operate
Here, the area for detecting the movement of an object using the motion detector function is set.
An alarm is activated when the movement of an object in the set area is detected.
4 Advanced settings
4.8 [Alarm] to set the alarm
268
Loading ...
Loading ...
Loading ...