Loading ...
Loading ...
Loading ...
・When [Stabilizer] is set to [On], the digital zoom factor is limited to half.
・Refer to the catalog specifications for the functions installed in each model.
[Note:]
・Refer to the catalog specifications for the lamps installed in each model.
・[MULTI_PTZ] [Indicator] can be set from the PTZ-camera.
[Note:]
・When [Audio out] is set to [Audio], [Monitor out] cannot be selected.
・If you set [Audio transmission mode] to other than [Off] or [Mic input], you
cannot set [Audio out] to [Monitor].
・If you set [Audio out] to [Monitor], you cannot set [Audio transmission mode] to
anything other than [Off] or [Mic input].
[Note:]
・The [Monitor out] setting can be changed when the imaging mode is 30 fps, 60
fps, or 15 fps.
・The output image may be reversed up or down.
[Note:]
・[MULTI_PTZ] The [Tilt adjustment lever position] can only be selected for the
Multi-directional camera settings.
[Indicator]
Select the ON/OFF status of the lamp. To check the operation status with the lamps, select
[On].
[Audio out]
Sets whether to use the audio output terminal as the adjustment monitor output.
Audio/monitor
[Monitor out]
Set the image format to be output from the image output terminal (MONITOR OUT).
NTSC/PAL
[Tilt adjustment lever position]
Set the [Tilt adjustment lever position] set when the camera is installed.
[High]/ [Mid]/ [Low]
4 Advanced settings
4.5 [Basic] for basic setup of the machine
150
Loading ...
Loading ...
Loading ...