Loading ...
Loading ...
Loading ...
[Note:]
・If you see anything other than [Service contract is already registered.] in the
[Viewnetcam.com] [Status] on the [Status] tab of the Maintenance page, restart
the camera and re-access the screen.
Confirm the [Viewnetcam.com] services be registered
1 Click [Status] in the Maintenance page.
2 Ensure that [Service contract is already registered.] is displayed in the [Status] of the
[Viewnetcam.com] in the [Status] tabs on the Maintenance page.
Configure port forwarding without using UPnP
If you use a router that does not support UPnP, you must manually configure the port forwarding
feature for the router.
1 On the Network Page, press the [Network] tab.
2 In the [Network Settings], select [Static].
3 Check the IP address and port number displayed here, and make corrections if necessary.
(This is required when configuring port forwarding for routers.)
4 Press [Set].
5 Configure the port forwarding by referring to your router's instruction manual.
・Use the IP address and port number you checked in step 3 to configure.
・Port forwarding functions may be described as address translation, static IP mascalade,
virtual server, virtual server, or port mapping, depending on the router.
4 Advanced settings
4.10 Networking configuration [Network]
346
Loading ...
Loading ...
Loading ...