Loading ...
Loading ...
Loading ...
[Note:]
・If you set [Viewnetcam.com] in [DDNS] on the [Advanced] tab of the Network
Page, the Network status is displayed.
[Note:]
・[PTZ] Only the PTZ camera is displayed as operation information.
The global address of the router is displayed.
Self check
The hardware self-diagnosis results are displayed.
Hardware information
[Number of times of pan/tilt operation]
The number of PAN and TILT operations and the last replacement time are displayed.
Press the [Execute] button of the [Reset at the time of replacement] button to change the
operation count to zero and the last replacement time is updated.
[Number of times of zoom/focus operation]
The number of ZOOM and FOCUS operations and the last replacement time are displayed.
Press the [Execute] button of the [Reset at the time of replacement] button to change the
operation count to zero and the last replacement time is updated.
[Status]
The number of starts, energizing time, temperature sensor information, heater information, etc.
are displayed.
USB interface
[Status]
If you recognize that the Wi-Fi USB adapter for installation is connected to the USB port, the
Wi-Fi USB adapter part number information is displayed. If it is not recognized, [Not use] is
displayed.
[Disable]
To disable the Wi-Fi USB adapter for installation, press [Execute].
If you want to recognize the Wi-Fi USB adapter again, use the INITIAL SET button.
Initialize (refer to the WEB Guide for instructions on how to initialize using the INITIAL SET
button).
4 Advanced settings
4.12 [Maintenance] to maintain the machine
362
Loading ...
Loading ...
Loading ...