Loading ...
Loading ...
Loading ...
・Incorrect settings may cause you to view unexpected camera images. After
setting, be sure to check the image using the pan tilt operation.
・Configure [Pan/tilt range setting] prior to setting the preset position. If the
preset position is outside the range of [Pan/tilt range setting], the preset position
stops at the end of the range.
・When the pantilt range setting screen is displayed, the zoom factor is 1.0 times.
During [Pan/tilt range setting], [PT LIMIT SETTING] is displayed in the images.
-If you do not operate for 5 minutes, the [Pan/tilt range setting] [Set] will be
disabled. To continue the operation, display the [Pan/tilt range setting] window
again and set it.
[Note:]
・The [Left end] angle should be smaller than the [Right end] angle and the
[Bottom end] angle should be larger than the [Top end] angle.
If [Upside-down] is set to [On], the [Bottom end] angle must be less than the
[Top end] angle.
・Set [Pan/tilt range setting] on a screen that is not zoomed in.
If you set the display size to 1.0 times (x1) on the zoomed display, a larger area
than when the display was set (enlarged display) is displayed.
・Incorrect settings may cause you to view unexpected camera images. After
setting, be sure to check the image using the pan tilt operation.
・Configure [Pan/tilt range setting] prior to setting the preset position. If the
preset position is outside the range of [Pan/tilt range setting], the preset position
stops at the end of the range.
・When the pantilt range setting screen is displayed, the zoom factor is 1.0 times.
During [Pan/tilt range setting], [PT LIMIT SETTING] is displayed in the images.
-If you do not operate for 5 minutes, the [Pan/tilt range setting] [Set] will be
disabled. To continue the operation, display the [Pan/tilt range setting] window
again and set it.
4.7.3 Set auto-tracking (Auto-tracking screen)
Click on the [Auto track setting] tab of the PTZ page.
Here, you can register, change, or delete auto tracking settings.
4 Advanced settings
4.7 Set PTZ
246
Loading ...
Loading ...
Loading ...