Loading ...
Loading ...
Loading ...
[Important]
・To use this function correctly, format the SD Memory Card on your computer
before using the SD Memory Card.
[Note:]
・Operation time: For 6 years, the power-on time after the SD card is inserted into
the camera, and for 2000 times, the upper limit of the number of business SD
Memory Card (MLC type) rewrites is used as a guide, and this does not guarantee
a durability period.
・The output terminal and SD Memory Card Alarm use the same output terminal.
・When either an alarm or SD Memory Card alarm is activated, a signal is output to
the output terminal.
・When an SD Memory Card Alarm is detected, the [Alarm Notice] on the live
image page is popped out. Click the [x] button of [Alarm notification] to clear the
[Alarm notification] display.
・The output signal output by the SD Memory Card alarm depends on the alarm
format setting.
In the case of latches: The output signal continues for the duration of the cause of
the SD Memory Card warning even after the alarm notification is cleared.
For pulses: The signal output of the output terminal continues while the cause of
the SD Memory Card warning persists even after the alarm notification is cleared.
However, when the time set in [Alarm output time] has elapsed, the signal output
of the output terminal stops.
SD Memory Card Alarm Detection Conditions: SD Memory Card error (write error, read error,
etc.), Operating time: 6 years, Overwrite count: 2,000 times
[On]:When the alarm condition is detected, a signal is output to the output terminal and [Alarm
notification] of the live picture is popupped.
[Off]:Stops detecting the alarm condition.
[Terminal state upon alarm detection]
Set the output terminal operation when an alarm is detected to either [Latch] or [Pulse].
[Latch]:When an alarm is detected, the alarm output terminal is set to [Terminal action upon
alarm detection] until [x] is clicked in [Alarm notification].
[Pulse]:When an alarm is detected, the terminal at the time of alarm outputting is set by [Terminal
action upon alarm detection] for the period set by [Pulse output width]. Click the [x] button of
4 Advanced settings
4.8 [Alarm] to set the alarm
259
Loading ...
Loading ...
Loading ...