Loading ...
Loading ...
Loading ...
This setting is available only when [Recording format] is set to [JPEG(1)] or [JPEG(2)] and [Save
trigger] is set to [Alarm input].
[File name]
Enter the file name for saving images to the SD Memory Card. The following file names are
actually saved.
File name:File name entered + Date and time (year, month, day, minute, second) + Sequence
number
Number of characters that can be entered:1 to 8 characters
Characters that cannot be entered:Double-byte and single-byte symbols " & * / : ; < > ? ￥ ¦
[Storage interval/number of images (pre-alarm)] [Image saving interval]
When [Save trigger] is set to [Alarm input], select the pre-alarm image interval to save the image
to the SD Memory Card.
When [Image capture mode] is set to 30 fps/15 fps: 0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps
When [Image capture mode] is set to 25 fps/12.5 fps: 0.08 fps/0.17 fps/0.28 fps/0.42 fps/1 fps
[Storage interval/number of images (pre-alarm)] [Number of images to be saved]
Select the number of pre-alarm images to be saved to the SD Memory Card when an alarm is
generated.
[Off]/[1 pic]/[2 pics]/[3 pics]/[4 pics]/[5 pics]
[Storage interval/number of images (Post alarm)] [Image saving interval]
If [Save trigger] is set to [Alarm input] or [Manual], select the intervals below to save images to
the SD Memory Card.
When [Image capture mode] is set to 30 fps/15 fps: 0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps
When [Image capture mode] is set to 25 fps/12.5 fps: 0.08 fps/0.17 fps/0.28 fps/0.42 fps/1 fps
[Storage interval/number of images (Post alarm)] [Number of images to be saved]
4 Advanced settings
4.5 [Basic] for basic setup of the machine
158
Loading ...
Loading ...
Loading ...