Loading ...
Loading ...
Loading ...
149
Programming an F-code Memory Box (Polling Memory)
Follow the steps below to program a memory box for F-code polling memory. The sub-address and passcode that you
program in the memory box are necessary for the other machine to poll your machine (request transmission) using
F-code communication.
• When programming a new memory box, a sub-address that is already programmed for another box cannot be used.
However, the same passcode can be used for more than one memory box.
• A total of 100 F-code memory boxes for all functions (polling memory, confidential, and relay broadcast) can be stored.
When 100 memory boxes are stored, no further memory boxes be stored. Delete unnecessary memory boxes and then
store a new memory box.
☞ Editing and Deleting F-code Memory Boxes (page 157)
• A passcode does not need to be stored if the other machine does not use a passcode.
1
Press the [SYSTEM SETTINGS] key.
2
Touch the [Address Control] key.
3
Touch the [F-Code Memory Box] key.
4
Touch the [Polling Memory] key in the
"Store" (upper) row of keys.
SYSTEM
SETTINGS
System Settings
Admin Password
Default Settings
Total Count
Address Control
Exit
List Print
(User)
Fax Data
Receive/Forward
USB-Device Check
Paper Tray
Settings
Printer Condition
Settings
Document Filing
Control
System Settings
Address Control
OK
F-Code Memory Box
Custom Index
Direct Address / Program
System Settings
F-Code Memory Box
OK
Relay
Broadcast
ConfidentialPolling Memory
Relay
Broadcast
ConfidentialPolling Memory
Store
Modify/Delete
Loading ...
Loading ...
Loading ...