Loading ...
Loading ...
Loading ...
32
MAC OS X (v10.3.3 TO 10.4)
14
Configure the printer driver.
(1) Select [AppleTalk].
• If multiple AppleTalk zones are displayed, select
the zone that includes the printer from the menu.
• If you are using Mac OS X v10.4, click the
[Default Browser] icon.
(2) Click the machine's model name.
The machine's model name usually appears as
[SCxxxxxx]. ("xxxxxx" is a sequence of characters
that varies depending on your model.)
(3) Select [Auto Select].
If you are using Mac OS X v10.4, make sure that
the PPD file of your model is selected.
(4) Click the [Add] button.
The PPD file of the machine is automatically
selected and the peripheral devices installed on the
machine are detected and automatically configured.
15
Display printer information.
(1) Click the machine's name.
(2) Click [Show Info].
16
Select the machine configuration.
If you selected [Auto Select] in (3) of step 14, the
machine configuration is detected and automatically
configured. Check the configured settings to make sure
they are correct.
(1) Select [Installable Options].
(2) Select the options that are installed on
the machine.
(3) Click the [Apply Changes] button.
(4) Click to close the window.
This completes the configuration of the printer
driver.
• [IP Printing] can be selected (in Mac OS X v10.4 the
[IP Printer] icon can be clicked) in (1) to print to the
machine over a network using the IPP function.
When the machine is in a remote location, this
function can be used in place of the fax function to
print a higher quality image than a fax. If you wish to
use the IPP function, follow these steps to configure
the printer driver.
(1) Select [Internet Printing Protocol] in "Printer
Type" ("Protocol" in Mac OS X v10.4). Enter the
address of the machine (IP address or domain
name) and the "Queue Name" (enter "ipp" in
"Queue Name").
(2) Select [Sharp] in "Printer Model" ("Print Using"
in Mac OS X v10.4) and click the PPD file of
your model.
(3) Click the [Add] button.
• The PPD file is installed in the following folders on
the startup disk.
[Library] - [Printers] - [PPDs] - [Contents] -
[Resources] - [en.lproj]
(1)
(2)
(4)
(3)
You can check the options that are installed on the
machine by printing out the "All Custom Setting List" in
the system settings. (However, note that "Input Tray
Options" must be set to the number of trays on the
machine.) Follow these steps to print the "All Custom
Setting List":
Press the [SYSTEM SETTINGS] key, touch the [List
Print (User)] key, and then touch the [All Custom
Setting List] key.
(1)
(2)
(1)
(3)
(2)
(4)
!mx4500_us_ins.book 32 ページ ２００５年１０月３１日 月曜日 午前１１時５７分
Loading ...
Loading ...
Loading ...