Loading ...
Loading ...
Loading ...
22
3
Press the [BLACK & WHITE START] key
().
Scanning begins.
4
If you have another page to scan,
change pages and then press the
[BLACK & WHITE START] key ( ).
Repeat until all originals have been scanned.
• The resolution and exposure can be changed for each original that is scanned.
• If no action is taken for one minute, scanning automatically ends and the transmission is reserved.
5
Touch the [Read-End] key.
A beep sounds.
Open the automatic document feeder and remove the original.
• When scanning is completed, "Job stored." will be displayed together with a job control number.
This number can be used to locate the job in the Transaction Report or in the Image Sending Activity Report.
• If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the
transmission is reserved.
To cancel transmission...
Press the [STOP] key ( ) before the [Read-End] key is pressed.
• If a fax is being received when the transmission operation is performed, the transmission will be reserved and transmitted
after fax reception is completed.
• If the memory becomes full while the originals are being scanned, a message will appear and transmission will be
canceled.
Place next original. (Pg.No.x)
Press [Start].
When finished, press [Read-End]
Read-End
Loading ...
Loading ...
Loading ...