Loading ...
Loading ...
Loading ...
쐌 DTC/1st trip DTC and malfunction item will not be displayed
automatically on CONSULT-II screen even though a malfunc-
tion is detected by ECM.
DATA MONITOR can be performed continuously even though
a malfunction is detected.
Use these triggers as follows:
1) “AUTO TRIG”
쐌 While trying to detect the DTC/1st trip DTC by performing the
“DIAGNOSTIC TROUBLE CODE CONFIRMATION
PROCEDURE”, be sure to select to “DATA MONITOR (AUTO
TRIG)” mode. You can confirm the malfunction at the moment
it is detected.
쐌 While narrowing down the possible causes, CONSULT-II
should be set in “DATAMONITOR (AUTO TRIG)” mode, espe-
cially in case the incident is intermittent.
When you are inspecting the circuit by gently shaking (or twist-
ing) the suspicious connectors, components and harness in
the “DIAGNOSTIC TROUBLE CODE CONFIRMATION
PROCEDURE”, the moment a malfunction is found the DTC/
1st trip DTC will be displayed. (Refer to “Incident Simulation
Tests” in “HOW TO PERFORM EFFICIENT DIAGNOSIS FOR
AN ELECTRICAL INCIDENT”, GI-23.
2) “MANU TRIG”
쐌 If the malfunction is displayed as soon as “DATA MONITOR”
is selected, reset CONSULT-II to “MANU TRIG”. By selecting
“MANU TRIG” you can monitor and store the data. The data
can be utilized for further diagnosis, such as a comparison with
the value for the normal operating condition.
SEF720X
ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION
KA24DE
CONSULT-II (Cont’d)
EC-97
FE
CL
MT
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
GI
MA
EM
LC
Loading ...
Loading ...
Loading ...