Loading ...
Loading ...
Loading ...
MONITOR ITEM CONDITION SPECIFICATION
HO2S1 HTR (B1)
쐌 Engine speed: Below 3,000 rpm (All models)
For 6 seconds after engine speed exceeds 3,000 rpm (4WD models
only)
ON
쐌 Engine speed: Above 3,000 rpm (2WD models)
More than 6 seconds after engine speed exceeds 3,000 rpm (4WD
models)
OFF
HO2S2 HTR (B1)
쐌 Engine speed: Idle after driving 2 minutes at 70 km/h (43 MPH) or more ON
쐌 Ignition switch: ON (Engine stopped) OFF
Major Sensor Reference Graph in Data Monitor
Mode
NGEC0043
The following are the major sensor reference graphs in “DATA MONITOR” mode.
(Select “MANU TRIG” in “DATA MONITOR” with CONSULT-II. “Trigger Point” is set to 100%, “Recording
Speed” is set to MAX..)
THRTL POS SEN, ABSOL TH·P/S, CLSD THL POS
NGEC0043S01
Below is the data for “THRTL POS SEN”, “ABSOL TH·P/S” and “CLSD THL POS” when depressing the accel-
erator pedal with the ignition switch ON.
The signal of “THRTL POS SEN” and “ABSOL TH·P/S” should rise gradually without any intermittent drop or
rise after “CLSD THL POS” is changed from “ON” to “OFF”.
SEF306Y
ENG SPEED, MAS A/F SE-B1, THRTL POS SEN, HO2S2 (B1), HO2S1 (B1), INJ PULSE-B1
NGEC0043S02
Below is the data for “ENG SPEED”, “MAS A/F SE-B1”, “THRTL POS SEN”, “HO2S2 (B1)”, “HO2S1 (B1)” and
“INJ PULSE-B1” when revving engine quickly up to 4,800 rpm under no load after warming up engine to nor-
mal operating temperature.
Each value is for reference, the exact value may vary.
TROUBLE DIAGNOSIS — GENERAL DESCRIPTION
KA24DE
CONSULT-II Reference Value in Data Monitor Mode (Cont’d)
EC-126
Loading ...
Loading ...
Loading ...