Loading ...
Loading ...
Loading ...
DTC & SRT CONFIRMATION MODE
=NGEC0034S08
SRT STATUS Mode
NGEC0034S0801
For details, refer to “SYSTEM READINESS TEST (SRT) CODE”,
EC-69.
SRT Work Support Mode
NGEC0034S0803
This mode enables a technician to drive a vehicle to set the SRT
while monitoring the SRT status.
DTC Work Support Mode
NGEC0034S0802
TEST MODE TEST ITEM CONDITION REFERENCE PAGE
EVAPORATIVE SYSTEM
EVAP SML LEAK P0440
Refer to corresponding
trouble diagnosis for
DTC.
EC-352
EVAP SML LEAK P1440 EC-474
EVAP V/S LEAK P1441 EC-476
PURG VOL CN/V P1444 EC-491
PURGE FLOW P1447 EC-509
VC CUT/V BP/V P1491 EC-537
PURG CN/V & S/V P1493 EC-369
HEATED OXYGEN SEN-
SOR 1 (FRONT)
HO2S1 (B1) P0130 EC-192
HO2S1 (B1) P0131 EC-200
HO2S1 (B1) P0132 EC-207
HO2S1 (B1) P0133 EC-214
HEATED OXYGEN SEN-
SOR 2 (REAR)
HO2S2 (B1) P0137 EC-237
HO2S2 (B1) P0138 EC-247
HO2S2 (B1) P0139 EC-257
EGR SYSTEM
EGR SYSTEM P0400 EC-327
EGRC-BPT/VLV P0402 EC-339
EGR SYSTEM P1402 EC-465
REAL TIME DIAGNOSIS IN DATA MONITOR MODE
(RECORDING VEHICLE DATA)
NGEC0034S10
CONSULT-II has two kinds of triggers and they can be selected by
touching “SETTING” in “DATA MONITOR” mode.
1) “AUTO TRIG” (Automatic trigger):
쐌 The malfunction will be identified on the CONSULT-II screen in
real time.
In other words, DTC/1st trip DTC and malfunction item will be
displayed if the malfunction is detected by ECM.
At the moment a malfunction is detected by ECM, “MONITOR”
in “DATA MONITOR” screen is changed to “Recording Data ...
xx%” as shown at left, and the data after the malfunction detec-
tion is recorded. Then the percentage reached 100%, “REAL-
TIME DIAG” screen is displayed. If “STOP” is touched on the
screen during “Recording Data ... xx%”, “REAL-TIME DIAG”
screen is also displayed.
The recording time after the malfunction detection and the
recording speed can be changed by “TRIGGER POINT” and
“RECORDING Speed”. Refer to CONSULT-II OPERATION
MANUAL.
2) “MANU TRIG” (Manual trigger):
ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION
KA24DE
CONSULT-II (Cont’d)
EC-96
Loading ...
Loading ...
Loading ...