Loading ...
Loading ...
Loading ...
3 CHECK OUTPUT SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect ECM harness connector.
3. Check harness continuity between ECM terminal 5 and terminal 1.
Continuity should exist.
SEF193V
If OK, check harness for short to ground and short to power.
OK or NG
OK (With CONSULT-II) 䊳 GO TO 5.
OK (Without CONSULT-
II)
䊳 GO TO 6.
NG 䊳 GO TO 4.
4 DETECT MALFUNCTIONING PART
Check the harness for open or short between EVAP canister purge volume control solenoid valve and ECM.
䊳 Repair open circuit or short to ground or short to power in harness or connectors.
DTC P0443 EVAP CANISTER PURGE VOLUME CONTROL
SOLENOID VALVE (CIRCUIT)
KA24DE
Diagnostic Procedure (Cont’d)
EC-374
Loading ...
Loading ...
Loading ...