Loading ...
Loading ...
Loading ...
Fuel Injection Timing
NGEC0014S07
SEF337W
Two types of systems are used.
Sequential Multiport Fuel Injection System
NGEC0014S0701
Fuel is injected into each cylinder during each engine cycle according to the firing order. This system is used
when the engine is running.
Simultaneous Multiport Fuel Injection System
NGEC0014S0702
Fuel is injected simultaneously into all four cylinders twice each engine cycle. In other words, pulse signals of
the same width are simultaneously transmitted from the ECM.
The four injectors will then receive the signals two times for each engine cycle.
This system is used when the engine is being started and/or if the fail-safe system (CPU) is operating.
Fuel Shut-off
NGEC0014S08
Fuel to each cylinder is cut off during deceleration or operation of the engine at excessively high speeds.
Distributor Ignition (DI) System
DESCRIPTION
NGEC0015
Input/Output Signal Chart
NGEC0015S01
Sensor Input Signal to ECM
ECM func-
tion
Actuator
Camshaft position sensor Engine speed and piston position
Ignition tim-
ing control
Power transistor
Mass air flow sensor Amount of intake air
Engine coolant temperature sensor Engine coolant temperature
Throttle position sensor
Throttle position
Throttle valve idle position
Vehicle speed sensor Vehicle speed
Ignition switch Start signal
Knock sensor Engine knocking
PNP switch Gear position
Battery Battery voltage
ENGINE AND EMISSION BASIC CONTROL
SYSTEM DESCRIPTION
KA24DE
Multiport Fuel Injection (MFI) System (Cont’d)
EC-31
GI
MA
EM
LC
FE
CL
MT
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
Loading ...
Loading ...
Loading ...