Loading ...
Loading ...
Loading ...
NOTE:
쐌 Be sure to read the explanation of “Driving Pattern” on EC-74
before driving vehicle.
쐌 It is better that the fuel level is low.
1) Start engine.
2) Drive vehicle according to “Driving Pattern”, EC-74.
3) Stop vehicle.
4) Select “MODE 1” with GST.
쐌 If SRT of EVAP system is not set yet, go to the following step.
쐌 If SRT of EVAP system is set, the result will be OK.
5) Turn ignition switch “OFF” and wait at least 5 seconds.
6) Start engine.
It is not necessary to cool engine down before driving.
7) Drive vehicle again according to the “Driving Pattern”, EC-74.
8) Stop vehicle.
9) Select “MODE 3” with GST.
쐌 If P0455 is displayed on the screen, go to “Diagnostic
Procedure”, EC-402.
쐌 If P0440 is displayed on the screen, go to “Diagnostic
Procedure”, EC-356.
쐌 If P1440 is displayed on the screen, go to “Diagnostic
Procedure”, EC-474.
쐌 If P1447 is displayed on the screen, go to “Diagnostic
Procedure”, EC-511.
쐌 If P0440, P0455, P1440 and P1447 are not displayed on the
screen, go to the following step.
10) Select “MODE 1” with GST.
쐌 If SRT of EVAP system is set, the result will be OK.
쐌 If SRT of EVAP system is not set, go to step 6.
Diagnostic Procedure
NGEC0953
1 CHECK FUEL FILLER CAP DESIGN
1. Turn ignition switch OFF.
2. Check for genuine NISSAN fuel filler cap design.
SEF915U
OK or NG
OK 䊳 GO TO 2.
NG 䊳 Replace with genuine NISSAN fuel filler cap.
DTC P0455 EVAP CONTROL SYSTEM (GROSS LEAK)
KA24DE
DTC Confirmation Procedure (Cont’d)
EC-402
Loading ...
Loading ...
Loading ...