Loading ...
Loading ...
Loading ...
INSPECTION PROCEDURE
=NGEC0028S02
1 INSPECTION START
1. Visually check the following:
쐌 Air cleaner clogging
쐌 Hoses and duct for leaks
쐌 EGR valve operation
쐌 Electrical connectors
쐌 Gasket (intake manifold, cylinder head, exhaust system)
쐌 Throttle valve and throttle position sensor operation
2. Start engine and warm it up until engine coolant temperature indicator points to the middle of gauge.
Ensure engine speed stays below 1,000 rpm.
SEF810K
3. Open engine hood and run engine at about 2,000 rpm for about 2 minutes under no-load.
4. Make sure that no DTC is displayed with CONSULT-II or GST.
OK or NG
OK 䊳 쐌 GO TO 2. (With CONSULT-II)
쐌 GO TO 3. (Without CONSULT-II)
NG 䊳 1. Repair or replace components as necessary.
2. GO TO 2. (With CONSULT-II)
3. GO TO 3. (Without CONSULT-II)
BASIC SERVICE PROCEDURE
KA24DE
Idle Speed/Ignition Timing/Idle Mixture Ratio Adjustment (Cont’d)
EC-55
FE
CL
MT
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
GI
MA
EM
LC
Loading ...
Loading ...
Loading ...