Loading ...
Loading ...
Loading ...
Actual work procedures are explained using a DTC as an example. Be careful so that not only the DTC, but
all of the data listed above, are cleared from the ECM memory during work procedures.
Malfunction Indicator Lamp (MIL)
DESCRIPTION
NGEC0553
SEF217U
The MIL is located on the instrument panel.
1. The MILwill light up when the ignition switch is turned ON without the engine running. This is a bulb check.
쐌 If the MIL does not light up, refer to EL section (“WARNING LAMPS”) or see EC-1195.
2. When the engine is started, the MIL should go OFF.
If the MIL remains on, the on board diagnostic system has detected an engine system malfunction.
ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION
VG33E
Malfunction Indicator Lamp (MIL)
EC-668
Loading ...
Loading ...
Loading ...