Loading ...
Loading ...
Loading ...
6 CHECK IGNITION COIL
1. Disconnect ignition coil harness connector.
2. Remove distributor cap.
3. Check resistance as shown in the figure.
AEC150A
MTBL0300
If NG, replace distributor assembly as a unit.
OK or NG
OK 䊳 GO TO 7.
NG 䊳 Replace distributor assembly as a unit.
7 CHECK POWER TRANSISTOR
1. Disconnect camshaft position sensor & power transistor harness connector and ignition coil harness connector.
2. Check power transistor resistance between terminals 2 and 8.
AEC151A
MTBL0301
OK or NG
OK 䊳 GO TO 8.
NG 䊳 Replace distributor assembly.
IGNITION SIGNAL
KA24DE
Diagnostic Procedure (Cont’d)
EC-564
Loading ...
Loading ...
Loading ...