Loading ...
Loading ...
Loading ...
Items
(CONSULT-II screen terms)
DTC*1 SRT code
Test value/ Test
limit
(GST only)
1st trip DTC*1 Reference page
VC CUT/V BYPASS/V P1491 ——X EC-1141
A/T DIAG COMM LINE P1605 ——X EC-1150
TP SEN/CIRC A/T P1705 ——X AT-173
P-N POS SW/CIRCUIT P1706 ——X EC-1153
O/R CLTCH SOL/CIRC P1760 ——X AT-182
*1: 1st trip DTC No. is the same as DTC No.
*2: These are not displayed with GST.
NOTE:
Regarding D22 models, “-B1” and “BK1” indicate right bank and “-B2” and “BK2” indicate left bank.
HOW TO ERASE EMISSION-RELATED DIAGNOSTIC INFORMATION
NGEC0552S06
How to Erase DTC ( With CONSULT-II)
NGEC0552S0601
NOTE:
If the DTC is not for A/T related items (see EC-597), skip steps 2 through 4.
1. If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait at least 5
seconds and then turn it ON (engine stopped) again.
2. Turn CONSULT-II “ON” and touch “A/T”.
3. Touch “SELF-DIAG RESULTS”.
4. Touch “ERASE”. [The DTC in the TCM (Transmission control module) will be erased.] Then touch “BACK”
twice.
5. Touch “ENGINE”.
6. Touch “SELF-DIAG RESULTS”.
7. Touch “ERASE”. (The DTC in the ECM will be erased.)
쐌 If DTCs are displayed for both ECM and TCM (Transmission control module), they need to be erased
individually from the ECM and TCM (Transmission control module).
ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION
VG33E
Emission-related Diagnostic Information (Cont’d)
EC-666
Loading ...
Loading ...
Loading ...